CCI.Control
CCI.Control
–
Operation
93
4.7.3.1
Enter function instance
The function instance is the address of the task controller with which the ISOBUS
implement can select a task controller, in case there are several task controllers.
Note
The ISOBUS implement selects the task controller with the lowest function
instance.
To enter the function instance, proceed as follows:
1.
Press the “Function instance button on the touchscreen or turn the scroll wheel
until this button is highlighted in white and then press the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the value on the touchscreen using the number pad or the slider.
3. Confirm your entry with "OK".
Note
The function instance can take any value between 1 and 32.
Note
Default setting for the function instance is 1.
Note
The terminal must be restarted after changing the settings.
4.7.3.2
Enter time delay
To enter the time delay for the notification upon leaving the fields (cf. Section
4.7.2), proceed as follows:
1.
Press the “Time delay” button on the touchscreen or turn the scroll wheel until
this button is highlighted in white and then press the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the value on the touchscreen using the number pad or the slider.
3. Confirm your entry with "OK".
Summary of Contents for CCI 50
