CCI.TECU
– Operation
22
4.3.3.3.1 Edit name
To edit the tractor name proceed as follows:
1. press on the button with the tractor name on the touchscreen or turn the scroll
wheel until the button is highlighted in white and then press the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the new name on the touchscreen using the keyboard.
3. Confirm your entry with "OK".
Note
The length of the name input field is limited to 16 characters.
4.3.3.3.2 Select signal source
To select the signal source for wheel speed sensor, ground speed sensor, PTO
sensor and 3-point hitch sensor, proceed as follows:
1. on the touchscreen press the button with the sensor or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
→ The following selection list opens:
2. Select the desired signal source. To do so, on the touchscreen press the
button with the signal source or turn the scroll wheel until the button is
highlighted in white and then press on the scroll wheel.
3. Confirm the selection with "OK".
Summary of Contents for CCI 50
