CCI.Command
– Operation
50
4.3.5.5
Enter the headland distance value
Note
This setting is only possible for a class 5 implement (fertilizer).
Note
If the
ISOBUS
implement transfers a value for the working depth of the sections,
this button is greyed out.
Manual entry is not necessary, because the implement specifications are
automatically transferred.
To enter the value for the headland distance, proceed as follows:
1. Press on the "Headland distance" button on the
touchscreen
or turn the scroll
wheel until the button is highlighted in white and then press on the scroll
wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2.
Enter the value on the
touchscreen
using the number pad or the slider.
3.
Confirm your entry with "OK".
Note
The valid range for the headland distance lies between 0 metres and 50 metres.
Summary of Contents for CCI 50
