CCI.Cam
CCI.Cam
– Operation
19
4.4.3
Enter time interval
To enter the time interval for the automatic camera switching, proceed as follows:
1. Press on the "Time interval" button on the
touchscreen
or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the new value for the time interval on the
touchscreen
using the number
pad or the slider.
3. Confirm your entry with "OK".
Note
Values between 1 and 10 seconds are valid for the time interval value range.
4.4.4
Activate / deactivate miniplexer
If you have connected a
miniplexer
to be able to use two cameras, it must be
activated.
To activate/deactivate the
miniplexer
, proceed as follows:
1. Press on the "Video
Miniplexer
" button on the
touchscreen
or turn the scroll
wheel until the button is highlighted in white and then press on the scroll
wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the
Boolean
value.
3. Confirm your entry with "OK".
4.4.5
Activate/deactivate MiniView
The
MiniView
function makes it possible to show the camera image displayed in
CCI.Cam
in other HMIs on the
terminal
, e.g. in implement operation.
Note
MiniView
is only available in hardware generations 2 and 3.
To activate/deactivate
MiniView
, proceed as follows:
1. Press on the "MiniView" button on the
touchscreen
or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the
Boolean
value.
3. Confirm your entry with "OK".
Summary of Contents for CCI 50
