Technical instructions
WPX30
v2.0EN
9. Transformer power
The transformer to be used should have a sec-
ondary voltage of 12V (12.5V according to the
model). Its power should be in keeping with the
power of the lights to be connected.
At any rate, the sum of the powers of the lights
should remain below or equal to the power of the
power
Transformer power
Max. no. of X30
50VA
1
100VA
2
300VA
7
Preferably use transformers sold in power supply units from the same manu-
facturer.
10. Projector Protection
Independent protection is necessary for each WPX30. Protection must be ensured in the secondary
of the transformer using fuses or breakers at 4A.
www.c-
cei.fr
9
