Technicalinst. guide
Limpido XC2
v4.0
Component
Description
Key
"UP / PLUS"
Used to increment values or to scroll to the top of setting or programme
lists
Key
"DOWN / MINUS"
Used to decrease values or to scroll down to the bottom of setting or pro-
gramme lists
Key
"VALIDATION / OK"
Used to validate a programme selection
Key
"RETURN / CANCEL"
Used to go back, cancel current updates without validating them
6.3. Use
The system is switched on using the luminous switch on the front. The screen displays the following
home message:
CCEI © 2015 v X.Y
Where v X.Y is the version of the programme installed your Limpido XC2 display, followed by
the control box model;
LIMPIDO XC2 60/100/160
And finally the type of cell connected to the control box (example for a 60m3 model);
To scroll through the menus, use the
and
keys.
To access a menu, press the
key.
To update a variable, press the
key until it flashes. Once the variable has started flashing, set the
value using the
and
keys. To validate the new variable value, press the
key again. Finally,
to go back without updating the variable, press the
key.
After a few seconds, the system status is displayed on the screen (see 6.3.1)
www.c-
cei.fr
14
