CCL ELECTRONICS C6081A, User Manual

11

SETUP THE WEATHER SERVER CONNECTION

Enter the following information into the below web interface "SETUP" page to connect the 
console to weather server, If you do not want to use 

Wunderground.com

 or 

Weathercloud.net

, 

please empty the station ID & key to ignore the data upload.

nist.time.gov

Server URL:

0.0000

North

*Latitude:

0.0000

Enter 0 to 90, no negative numbers

Enter 0 to 180, no negative numbers

East

*Longitude:

Time server setup  

Location for sunrise / sunset

WiFi Router setup

ADVANCED

Wunderground

Station ID:

WDw124

******

******

******

IPACIR23Wc

Weather server setup  

Station key:

Router:

Add Router

Search

Security type:

Router Password:

WAP2

ROUTER_A

Language:

English

Weathercloud

Station ID:

Station key:

******

IDCR21w1

http://WAC.com

Station ID:

URL:

Station key:

Mac address

00:0E:C6:00:07:10

Hemisphere 

* Depends on the model

SETUP

Apply

Firmware version: 1.00  

0:00

Time Zone:

N

Press "ADVANCED" icon 
to Advanced page

Press to search router

Press to allow add 

router manually

Enter the Latitude value

Enter the Longitude 

value

SETUP page

Select setup UI display language

Press to complete the setting

Select router (SSID) for connection

Enter new Station ID and Station key 
that assigned by Wundergriund

Enter new Station ID and Station key 
that assigned by weathercloud

Enter new Station ID and Station key 
that assigned by the corresponding 
weather server

Manually enter the SSID if not on list

Select time server

Select time zone of your location

Select the direction (e.g. EU 
countries Longitude is East and US 
is West)

Select the sensor located hemisphere 
(e.g. US and EU countries are also "N",
Australia is "S")

Reserved for validated weather server, 
detail please consult with your retailer

Select router's security type (usually 
WAP2)

Router's password (leave blank if the 
Security type is "Open")

SETTINGS

NOTE:

- When WI-FI setup is completed, your PC or mobile will resume your default WI-FI connection.

- During AP mode, you can press and hold the 

[ SENSOR / WI-FI ] 

key for 6 seconds to stop 

AP mode and the console will restore your previous setting.

TIME ZONE

To automtically set the time display to your time-zone, change the time zone in SETUP page of 
previous section from '0:00' (default) to your time zone (e.g.+1:00 for Germany).

nist.time.gov

Server URL:

Time server setup  

0:00

Time Zone: