15
NOTE:
- In normal mode, press
[ CLOCK SET ]
key to switch between year and date display.
- During the setting, you can press and hold
[ CLOCK SET ]
key for 2 seconds to back to
normal model.
DAYLIGHT SAVING TIME (DST)
DST function is set to "AUTO" by default (for EU or US version). If the current date on display is
with in the summer daylight saving period, the time will be automatically adjusted forward by +1
hour, and DST icon will be shown on the LCD display.
MOON PHASE
The moon phase is determined by the
time, date and time zone. The following
table explains the moon phase icons of
the Northern and Southern Hemispheres.
Please refer to
POINTING THE
WIRELESS 7-IN-1 SENSOR TO SOUTH
section about how to setup for the
Southern Hemispheres.
Northern
Hemisphere
Moon Phase
Southern
Hemisphere
New Moon
Waxing Crescent
First quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Third quarter
Waning
Crescent
SUNRISE & SUNSET TIME
The console indicates your location’s sunrise & sunset time by the
time zone, latitude and longitude you entered. Please enter the correct
information in the regarding settings. If the latitude and longitude values
do not match the time zone, the sunrise & sunset time cannot be shown.
SETTING ALARM TIME
1. In normal time mode, press and hold
[ ALARM ]
key for 2 seconds until the alarm hour digit
flashes to enter alarm time setting mode.
2. Press
[ ]
or
[ ]
key to change the value. Press and hold the key for quick-adjust.
3. Press
[ ALARM ]
key again to step the setting value to Minute with the Minute digit flashing.
4. Press
[ ]
or
[ ]
key to adjust the value of the flashing digit.
5. Press
[ ALARM ]
key to save and exit the setting.
NOTE:
- In alarm mode, the “
” icon will display on the LCD.
- The alarm function will turn on automatically once you set the alarm time.
