9
3. Press
[ CLOCK ]
key
again to step the setting items in this sequence: Hour format
Hour
Minute
Second
Year
Month
Date
Hour offset
Language
DST AUTO/OFF.
Note:
- The unit will automatically exit setting mode if no key was pressed in 60 seconds.
- The hour offset is for DCF and MSF version. Its range is between -23 and +23 hours.
-
DST
(Daylight Saving Time) feature is set to Auto (factory set).The clock has been
programmed to automatically switch when the daylight saving time is in effect. User can set the
DST
to
OFF
to
disable the feature.
DISABLE / ENABLE RCC SIGNAL RECEPTION
1. Press and hold the
[ RCC ]
key 8 seconds to disable the reception.
2. Press and hold the
[ RCC ]
key 8 seconds to enable automatic RCC reception.
RCC on
RCC off
TO TURN ON / OFF ALARM CLOCK (WITH ICE-ALERT FUNCTION)
1. Press the
[ ALARM ]
key anytime to show the alarm time.
2. Press the
[ ALARM ]
key to activate the alarm.
3. Press again to activate alarm with ice-alert function.
4. To disable the alarm, press until the alarm icon disappears.
Alarm off
Alarm on
Alarm with ice-alert
TO SET THE ALARM TIME
1. Press and hold the
[ ALARM ]
key for 2 seconds to enter alarm setting mode
HOUR
will begin to flash.
2. Use
[ ]
key /
[ ]
key to adjust
HOUR
, and press the
[ ALARM ]
key to proceed to set
MINUTE
.
3. Repeat 2 above to set
MINUTE
, and then press the
[ ALARM ]
key to exit.
Note:
- Pressing the
[ ALARM ]
key twice when alarm time is being displayed will activate the temperature-adjusted
pre-alarm.
- The alarm will sound 30 minutes earlier if it detects outside temperature is below -3°C.
WEATHER FORECAST
The device contains sensitive pressure sensor built-in with sophisticated and proven software that predicts
weather for the next 12 ~ 24 hours within a 30 to 50 km (19-31 miles) radius.
Sunny/Clear
Slightly Cloudy
Cloudy
Rainy
Rainy/Stormy
Snowy
