background image

 

.

                                                                       

CLI Receiving Mode  (DTMF / FSK )                                              

.

 

The  system senses CLI  on Junction lines in DTMF  mode or FSK  mode. 
Procedure

:    

 

 

        

Dial #*0000  + 181  J 0 # f or FSK mode 

 

 

Dial #*0000  + 181  J 1 # f or DTMF mode       where  J= Junction Number  1, 2 

Def ault: DTMF mode 
 

.

                                                  

CLI Transmitting Mode (FSK)                                     

 

 

             

.

 

The  PBX generates  CLI  on Extensions in DTMF  mode in def ault. 

 

.

     

                                          

Conference with 1 Junction & 1 Ext                                                            

.

 

An extension user can  establish a conf erence with an  extension and a Junction line.  
Process

:  

During conversation with  a Junction line,  Hook-Flash to hold the line. 

               Then  dial  

 Ext No. 

 

.

     

                                          

Conference with 2 Junctions                                                            

.

 

An extension user can  establish a conf erence with 2 Junction Lines

.

 

Process

:  

During conversation with  a Junction line  - Hook-Flash - ## 

(To park the Call) 

– 0 – Tel. No (who is to be included in 

conf erencing) 

– Hook Flash - # * - Now all 3 party can talk to each other.  

When  Ext keeps the Handset down, the conf erence ends.  
 

.

                                                                                      

Day / Night Mode                                                                     

.

 

The  PBX can be conf igured in 2 sets of  programming. One f or the day mode and one f or the night mode. 
To change  the system to Day Mode, Dial # 20 
To change  the system to Night Mode, Dial # 21 
Def ault

:

 Day Mode. 

 

.

                                                               Denied Table 

– A                                                                      

.

 

Numbers  to be disallowed to extensions whose L = 4, are  to be def ined in this table.  For 

value of L refer “Junction Dialing 

Controls”. 
This  table has 16 Locations. 
Procedure

:

     Dial #

0000  + 41  QQ ABCD# 

                                 Where  QQ=  01 to 16 (16  Locations of  the Table) 
                                        ABCD= The  starting 4 digits of  the Tel numbers  to be denied to extension.  
                                        For less than  4 digits, dial # at the end of  digits.

 

To clear  this Table:

    Dial #

0000  + 41 # 

To clear  a particular  location of this table

  Dial #

0000  + 41 QQ  # 

 

.

                                                                Denied Table 

– B                                                                     

.

 

Numbers  to be disallowed to extensions whose L = 5, are  to be def ined in this table.  For value of  L 

refer “Junction Dialing 

Controls”. 
This  table has 16 Locations. 
Procedure

:

    Dial #

0000  + 42 QQ  ABCD# 

                       Where  QQ= 01  to 16 (16  Locations of  the Table) 
                              ABCD= The  starting 4 digits of  the Tel numbers  to be denied to extension. 
                              For less than  4 digits, dial # at the end of  digits.

 

To clear  this Table:

   Dial #

0000  + 42  # 

To clear  a particular  location of this table:

    Dial #

0000  + 42 QQ  # 

 

.

                                                             Do Not Disturb (DND)                                                                 

.

 

In  DND mode, no one can call the DND extension 
PROCEDURE:     Dial   # 83    
To cancel  DND, simply lif t Handset. 
Def ault: Normal Mode 
 

.

                                                                    

Door Phone                                                                          

.

 

One  Door Phone can be connected to the PBX. 
Open the  back cover of  the Door Phone and connect 2 wires  on the Terminal  block. 
These  2 wires  are  to be connected to any of  the Extension port (f rom 601 to 606)  of  the PBX. 
To def ine the  Extension as the f irst Doo r Phone extension, program as below

:

 

       Dial #

0000  + 80 N# 

           Where,  N  = 1 -  6 (Representing  the Extension numbers f rom 601  to 606) 

Summary of Contents for 206B













Reviews: