11
To cancel DND, simply lift Handset.
For KTS phone DND can be activated/deactivated by pressing FWD/DND button. When FWD/DND key is pressed 1
st
time
DND will be activated and LED of DND button is red, when DND is activated and FWD/DND button is pressed then DND
will deactivated and LED of DND button is OFF.
Default: Normal Mode
.
Door Phone
.
Upto 2 Door Phones can be connected to the PBX.
Open the back cover of the Door Phone and connect 2 wires on the Terminal block.
These 2 wires are to be connected to any of the Extension port (from 601 to 616) of the PBX.
To define the Extension as the first Door Phone extension, program as below
:
Dial #
0000 + 80 NN #
Where, NN= 01
– 32 (Representing the Extension numbers from 601 to 632)
To define the Extension as the second Door Phone extension, program as below
:
Dial #
0000 + 81 NN #
Where, NN= 01
– 32 (Representing the Extension numbers from 601 to 632)
To make the first Door Phone extension as a normal Extension, program as below
:
Dial #
0000 + 8000 #
To make the second Door Phone extension as a normal Extension, program as below
:
Dial #
0000 + 8100 #
Door Phone ring assignment
Dial #
0000 + 82 NN # - To assign extensions to ring when Door Phone calls.
Where, NN= 03
– 32 (Representing the Extension numbers from 603 to 632)
Repeat the program for up to 6 Extensions maximum.
Dial #
0000 + 82 # - To clear all programmed extensions for Door Phone calls.
Default
:
Extension 601 and 602 are assigned Door Phone Calls and these extensions cannot be removed from Door
Phone Calls ringing.
Note
:
Maximum 8 Extensions can be defined for Door Phone call. Out of these 8, two extensions 601 and 602 are fixed.
:
Extensions cannot initiate call to talk to Door Phone.
.
Door Phone Call Forward to Mobile
.
Door Phone calls can be forwarded to a mobile/ landline number.
Save / Delete Mobile Number:
Save Mobile Number: #* 0000 860 XXXXX # (Where XXXX = Mobile Number, max. 16 digits)
Delete Mobile Number: #* 0000 860 #
Program:
#* 0000 861 1 TT # Where, TT = Time (0
– 99 sec) after which call is to be forwarded on saved tel. number.
Note:
When no telephone number is saved, this feature is disabled.
.
Door Lock (Optional)
.
Up to 2 door locks can be optionally connected to the PBX if optio
nal ‘Ethernet & Door Lock Card’ is connected.
Use a lead with 2 RJ11 connectors on one side & 1 RJ45 connector on other side. This lead will connect the two door
phones to the RJ45 FML connector of Ethernet & Door Lock card.
Time duration of Door Lock remaining unlocked can be changed by following programming:
Dial #
0000 + 185 TT # Where, TT= 01-99 (04 means 0.4 Secs)
Default: TT= 04
Operating Procedure:
The door Lock can be operated in 2 modes.
1. While talking to the Door Phone, Press
1 for the first Door Lock, *2 for second Door Lock.
2. Directly
:
Lift Handset and dial #10 (Door Lock 1) / #19 (Door Lock 2)
.
Emergency Call
.
When any extension dials # 88, all extensions start ringing. All extensions get connected to the extension who had dialed
the Emergency code. All can talk in conference.
.
Ethernet Card for Call Record on PC
.
Ethernet Card can be connected to the PBX to view the Call Record / Program the PBX from any Computer present on the
LAN network.
Enable Ethernet Card in PBX :
