15
3 - The Extension can dial all numbers except for STD numbers.
4 - The Extension can dial all numbers except for
the numbers starting with digits defined in “Denied
Table-
A”
5 -
The Extension can dial all numbers except for the numbers starting with digits defined in “Denied
Table-
B”
6 - The Extension cannot dial out but can make internal calls.
To give all extensions the same L value:
Dial #
0000 + 40 L #
Note
:
In default: all extensions are in L = 1 mode.
.
Junction Call Hold + Tr Making multiple calls
.
To transfer a Junction line to another extension, FLASH and dial the Extension number while talking on the junction line.
Now there can be following 4 conditions:
1. When called extension lifts, calling extension can converse and then keep the Handset down. The Junction call will
then get transferred.
2.
Called extension lifts but doesn’t want to talk then he may keep the Handset down.
The call will come back to the transferring extension.
3. The called extension is ringing but not lifting the Handset. Keep the Handset down.
The call will ring on the called extension for 25 secs and if not answered it will ring back on the transferring extension.
Now if the Transferring extension is busy, the Junction call will keep waiting for the Transferring extension to get free.
4. On dialing an engaged extension user would get engaged tone. During the engaged tone user can FLASH and get
Connected to the Junction line, This is the default setting in the PBX.
Alternately the user can change to the following mode
:
If the called Extension is engaged, the user will hear 2 tones.
Now FLASH from SLT/ Press
HOLD
key form KTS to get back to the Junction line. If FLASH from SLT/
HOLD
key is
not pressed form KTS is not done within 10 secs, the Junction line will get connected.
Programming
:
Dial #
0000 + 830 #
To shift back to the default setting, Dial #
0000 + 831 #
Making two or more Junction calls from SLT
While talking on one Junction line,
FLASH from SLT/ Press
HOLD
key form KTS
Dial ## - To park the call
Dial 0 to take another Junction
Dial the required Telephone number
FLASH from SLT/ Press
HOLD
key form KTS
Dial ## - To retrieve the first parked call
Similarly, more calls can be made.
.
Junction Dialing Delay Time
.
This is the time after the last digit dialed by an extension on Junction Line.
It is 7 secs in default.
The PBX assumes call maturity from after the lapse of this time.
The FLASH from SLT/ Press
HOLD
key form KTS function to hold an Incoming Junction call starts working after the lapse
of this time.
To change this delay time: Dial #
0000 + 03 TT # Where, TT= 01 to 99 secs. Default value = 07 (7 secs)
.
Junction Grouping
.
Two set of Junction groups can be made. One group can be accessed say by dialing 0 and the other group of Junction
lines by dialing 8.
Programming:
Dial #
0000 + 50 J G #
Where, J = 1 - 8 Junction number to be set in Junction Group.. More than one Junction can be
defined in a group by repeating this program. By default, all junctions are in Group 1 (accessed by
0).
G = 0 or 8. Group 0 is accessed by dialing 0; group 8 is accessed by dialing 8.
By Default all Junction Lines are in Zero group.
Other Options
Programming procedure
Dial #
0000 + 54 1 # - PBX will allot other Group Junction line if all Junctions of accessed Group are busy.
Dial #
0000 + 54 0 # - PBX will allot engaged tone if all Junctions of accessed Group are busy.
Default: PBX will allot other Group Junction line if all Junctions of accessed Group are busy.
