background image

20 

 

Wattage at 220V

 

35 W 

Extension Loop Resistance  

 

Less than 600 Ohms

 

Ambient Temperature           

 

+5

C to +45

C

 

Ambient Humidity                  

 

95% Maximum

 

Recommended Batteries for Battery Backup 

 

Rechargeable  12V  7AH  Maintenance  Free  Lead  Acid 
battery

 

Telephone Sets                     

 

Pulse or DTMF dialing Phones

 

Cabling

 

2 Core from every Telephone set to the PBX

 

 

.

                                                              Warranty claim details                                                             

.

 

This  manual  is  also  your  Warranty  document  and  should  be  preserved  along  with  Invoice  copy  for  claiming 
warranty. 

Model Number as per the Invoice: . . . . . . . . . . . . . . . . . . . . . .  Product S.No.: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   
Date of purchase: . . . . . . . . . . . . . . . . . . . . . . . . . .                    Purchaser Name: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..   
Purchaser’s Contact No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   Purchaser’s Address: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . 
Copper Connections Pvt. Ltd. warrants that this product is manufactured under stringent quality standards, making it free from defects in 
material and workmanship, as per the following terms and conditions: 
1.  The limited warranty for the system is valid for a period of twelve months from the date of purchase or fifteen months from the date 

of manufacture which ever is earlier. 

2.  The  limited  warranty  extends only  to  the  original consumer/  purchaser of  the product and  is  not  assignable  or  transferable  to  any 

subsequent purchaser/end user. 

3.  During the limited warranty period, Copper Connections Pvt. Ltd. or its authorised service network will repair or replace, at Copper 

Connections Pvt. Ltd. option, any defective product or parts thereof with a new or factory rebuild replacement items and return the 
product  to  the  consumer  in  working  conditions.  No  charge  will  be  made  to  the  consumer  for  either  parts  or  labour  in  repairing  or 
replacing the product. All replaced parts shall become the property of Copper Connections Pvt. Ltd..                                                                                                                                                                                    

4.  Repaired product will be warranted for a balance of original warranty period. 
5.  Upon request from Copper Connections Pvt. Ltd. or its authorised service center, the consumer must provide purchase receipt or 

other information to prove the date and place of purchase. 

6.  The consumer shall have no benefit or coverage if any of the following conditions are applicable: 

a)  The product has been subjected to abnormal use, abnormal condition, improper storage, exposure to moisture or dampness, 

exposure  to  excessive  temperature  or  fire  etc.,  unauthorised  modifications,      unauthorised  connections,  unauthorised  repairs 
including  but  not  limited  to  use  of  unauthorised  spare  parts  in  repairs,  misuse,  neglect,  abuse,  accident,  alteration,  improper 
installation. 

b)  Copper Connections Pvt. Ltd. was not notified by consumer of the alleged defect or malfunction of the product during the limited 

warranty period. 

c)   The product was used with or connected to equipment not fit for use with Copper Connections Pvt. Ltd. system or used in other 

than its intended use. 

d)  THE SYSTEM IS NOT CONNECTED TO A PROPER EARTH OR INCASE HIGH VOLTAGES APPEAR ON EARTH.  
e)  THE  DAMAGE  IS  CAUSED  BY  LIGHTENING  ON  EXTENSIONS/  JUNCTION  LINES/  OR  SPIKES/  SURGES/  HIGH 

VOLTAGES FROM AC MAIN SUPPLY. 

7.  The consumer may contact the authorised dealer to call the service personnel for carrying out repairs or maintenance and the same 

would be attended within a reasonable response time assigned to the dealer. 

8.  The consumer will be billed for parts or labour charges not covered by this limited warranty. 
9.  If the product is brought to Copper Connections Pvt. Ltd. for repairs, after the warranty period Copper Connections Pvt. Ltd. normal 

service policy shall apply and customer shall be charged accordingly. 

10.  In  no  event  shall  Copper  Connections  Pvt.  Ltd.  or  their  authorised  dealer  be  liable  for  special  or  consequential  damages  or  any 

delay in the performance of this warranty due to causes beyond their control. Copper Connections Pvt. Ltd. shall not be liable for 
incidental or consequential damage or a loss of anticipated benefits or profits, loss or impairment of privacy of conversation, work 
stoppage or loss or impairment of data arising out of the use or inability to use the product. 

11.  Copper Connections Pvt. Ltd. neither assumes nor authorises any authorised service center or any person or entity to assume for it 

any other obligation or liability beyond what is expressly provided by this limited warranty. All warranty information, product features 
and specifications are subject to change without prior notice. 

12.  Any dispute arising out of this warranty shall be subjected to jurisdiction of the arbitrator within the city of Delhi. 
13.  The  decision  of  Copper  Connections  Pvt.  Ltd.,  on  defects,  damages  etc  shall  be  final  and  binding  on  the  parties  and  no  dispute 

regarding this, could be agitated before any civil court.                                                                                

14. 

If  the  product  is  purchased  online  through  Amazon  or  other  web  portals,  then  in  case  of  repair,  the  system  is  to  be  sent  to  the 
mentioned company address in Delhi. One-way delivery charge will be borne by company, and one-way will have to be borne by the 
user.

 

Part no: 832X Manual 

– 27 

 

ISO 9001:2015 Certified company

 

 

Copper Connections Ltd.

 

 B-221, Okhla Industrial Area, Phase-1, New Delhi-110020    Ph: 011-40625543 

www.copperconnections.com

 

Summary of Contents for 832SU





















Reviews: