7
For Multilayer Auto attendant-
Format SD-Card with FAT16/FAT32 format and make a folder named-
01
Put these files with File name in folder 01-
•
004-Multi layer AA msg1.mp3
(60secs)
•
005-Multi layer AA msg2.mp3
(60secs)
•
006-AA Level2 msg1.mp3
(23secs)
•
007-AA Level2 msg2.mp3
(23secs)
•
008-AA Level2 msg3.mp3
(23secs)
•
009-AA Level2 msg4.mp3
(23secs)
•
010-AA Level2 msg5.mp3
(23secs)
•
011-AA Level2 msg6.mp3
(23secs)
•
012-AA Level2 msg7.mp3
(23secs)
•
013-AA Level2 msg8.mp3
(23secs)
•
014-AA Level2 msg9.mp3
(23secs)
•
015-AA Level2 msg10.mp3
(23secs)
•
016-AA Level2 msg11.mp3
(23secs)
•
017-AA Level2 msg12.mp3
(23secs)
•
018-AA Level2 msg13.mp3
(23secs)
•
019-AA Level2 msg14.mp3
(23secs)
•
020-AA Level2 msg15.mp3
(23secs)
•
021-AA Level2 msg16.mp3
(23secs)
•
022-Night msg.mp3
(23secs)
Note- File name before - (dash) is fixed after that it can be any name and file extension must be
.mp3
.
Auto Day/Night Mode
Enable Auto Day/Night mode for particular day-
Dial- #* 0000 + 56 D X#
Where D= Day (1for Sun, 2
for Mon, …. 7 for Sat)
D= 0 for Enable/Disable for all days
X = 0 for Disable, 1 for enable
Setting time for Auto Day/Night mode-
Dial- #*0000 + 57 D A/P HH MN + A/P HH MN #
Where
D= Day (1for Sun, 2 for Mon, …. 7 for Sat)
A/P
– 0 for AM, 1 for PM
HH- Hour (01-12)
MN- Minute (00-59)
1
st
A/P HH MN is for Day mode time, 2
nd
A/P HH MN is for Night mode time.
.
Barge-In
.
Extension number 601 and 602 has the facility to barge into any Extension or Junction Line and over hear or talk in
conference.
#*0000+22 NN# to add a Ext Number in barge in allowed table. (Maximum 5 extns) default is 601,602
#*0000+22# to reset it default 601 and 602.
To listen to a Junction line, dial # 7 J (J = 1 to 4, the Junction to be barged into)
To listen to an Extension, dial # 79 Ext Number
.
Call Forward
.
There are two types of Call Forwarding
:
Call Forward Always
An extension can divert all incoming calls to another extension by dialing #81 XXXX from its own extension. Where XXXX
is the extension number where calls are to be diverted. XXXX can be 1-4 digits flexible number.
To clear this Call Forward Always feature
:
Dial #81#
This feature can also be programmed from any of the Programming Extensions as explained below
:
Dial # 26 NN XXXX
Where, XXXX= Extension number where Calls are to be forwarded. Flexible number (1-4 digits long)
NN= the last 2 digits of the original Extension.
Dial # 26 NN # (To clear the feature of NN Extension from any of the programming Extension)
Dial # 26 # (To clear the Call Forward Always feature of all the extensions. To be dialed from any of the progm. Ext)
