Please use electricity within the product specification (PDS-30:AC100-240V, 50/60Hz).
Otherwise, it may cause fire or electric shock.
Please avoid following conditions to power cord;
Damaging, bending, twisting, pulling, heating, modifying, and putting heavy objects or
heavy weight on it. When unplugging, please pull plug itself, not power cable.
It may cause power code damage, and fire and electric shock)
Before moving products, disconnect power cords and other cables.
Damaging the cables may result in fire or electric shock.
Unplug the power cord while the product is not used for an extended period of time, will
ensure safety.
Please clean plug electrodes well more than once a year. Dust in the area may cause fire.
When cleaning the casing of the product, please turn the power off then unplug. Please
use dry cloth to clean the electrode.
If you touch this product simultaneously with any other electric products which have
different electrical potential from this product, this may result in electric shock. Therefore,
please ground from FG connector with 0.5 to 1.25 sq (AWG20 to AWG 16) wires. If those
equipments other than this product is not grounded but has electrical potential, It may be
safer to connect FG connectors of both products together.
Please ground PDS-30 with 3P grounding electrode power cord.
This product operates at a power supply voltage of 100 to 240V AC. The power cord
which is supplied with this product is for 100V. If the product is to be used at 200V or
above, please use an appropriate powers cord.
Do not use when dew is formed on the products.
If dew is formed, please dry the equipment thoroughly before usage.
When rubber feet are removed to mount this product in a system rack or case, the portion
of the M3 screws penetrating the case must be less than 2 mm long. If the insertion is
longer than 2mm, internal components may be short-circuited.
Please use this product on a stable surface with minimal vibration. A surface with rubber
pieces should be facing down.
Do not touch the power cords or connect peripheral devices during lightning.
Doing so may result in electric shock.
Caution
Turn the power off when connecting and disconnecting cables.
Otherwise it may result in fire and/or electric shock.
Please install product to locations in following conditions:
- In a flat and stable location with minimal vibration.
- Well-ventilated places with minimal dust.
- Place free from any water, oil, liquid, chemical, or steam.
- Place free from corrosive or combustible gas.
- Place away from water faucets, boilers, humidifiers, air conditioners, heaters, or stoves.
- Place that are not subject to sudden temperature changes.
- Place where products can be grounded.
Please do not place any object on the product.
