Network Keyboard
37
General
y
Setup type
: Select
Basic
or
Advanced
when
controlling devices via RS485 connection only, or select
Advanced
when controlling devices via network and
RS485 connections.
– Port
: Select the device to control via RS485 connection
from the drop-down list, and set up the port information
for RS485 communication. The port information is
set up separately for PTZ cameras and DVRs. If the
PTZ cameras to register have different port information
from each other, you can register the cameras in the
Advanced mode only and not in the Basic mode. Refer
to the following
Setup, General – Advanced Mode
(p. 37) for details on registration in the Advanced
mode.
Setup
The setup screen differs depending on the setup type set during the
Device – General
setup.
General – Basic Mode
You can control devices only via RS485 connection when registering the devices in the Basic mode. You
do not register DVRs but set up the RS485 port information only when controlling the DVRs. Refer to
5.3 Device, General
(p. 37) for details on setting up the RS485 port information of DVRs.
y
Number of CAMs
: Set up the number of connected
cameras.
y
485 ID
: Set up the RS485 ID of PTZ cameras for
RS485 communication. The RS485 ID will be used
to distinguish the camera from other cameras when
controlling it by using a network keyboard, so each
camera should have its own unique RS485 ID. You can
change the RS485 ID by clicking the field and adjusting
the number.
y
Model
: Click the field and select the PTZ camera’s
model from the PTZ camera list.
General – Advanced Mode
You can control devices via network and RS485 connections when registering the devices in the Advanced
mode.
Summary of Contents for Intelligent Network Keyboard
