53
②
Relay SMTP is set on ‘Gmail’ as default, but when ‘Default’ (in menu tab) is selected, this will changed
to dvr@cctvuser.com.
③
Receiver Email can be set up to 5 users (emails).
④
Email Interval settings are as follows [5 sec / 1 min / 3 min / 5 min /10 min].
６
-
６
-
５
Bandwidth
Move to
{Menu}
{Setup}
{Network}
{Bandwidth}.
This sets up the limit of the bandwidth to be used when bringing the live image, adjust resolution/quality and
transmitting the data by using the network.
Image Resolution
CIF / D1 / 960H
Image Quality
Adjust quality of the image, as the value increases, the
compression rate gets higher and image quality gets low.
However the transmission rate gets higher.
Bandwidth Limit
You can set the network bandwidth between 40 ~ 4000kbps.
As the value increases, the network transmission speed gets
faster.
Select Off if you do not wish to limit the network bandwidth.
Transmission
Codec
JPEC / H.264
６
-
６
-
６
iSCSI
iSCSI
(Internet Small Computer System Interface)
is a storage expansion function using the internet
(Ethernet) as extra storage base..
①
Set to ‘Enable’.
②
In put the IP Address & Port Number of the iSCSI, if ‘CHAP’ is available, input the ‘Account’ & ‘Password’
details.
③
When the ‘Session State’ shows ‘Active’, this is the normative state. When there is an ‘Error’, the
message ‘Check Network’ or ‘Log in Fail’ will be shown. Please check the ‘Network Settings and/or
Environment as well as the iSCSI settings state.
[Figure 6-50. Setup iSCSI Window1]
Summary of Contents for Cobra Elite 960H
Page 1: ...960H Ver 2 0 Elite ...
