4
Tx
- Transmitter
Figure 1
7.
Video Input Brightness Adjust
8.
RS485 Output
9.
RS485 Data Receive L.E.D
10.
Gain Control Switch
11.
Power L.E.D
12.
Power Input 12v D.C Only
Connections - TX Transmitter
Each CCTV Mule is clearly marked on the power side as:
Tx
- Transmitter
Rx
- Receiver
Rx
- Receiver unit has the following connections;
1.
Channel 1 Video Output
2.
Channel 2 Video Output
3.
Channel 3 Video Output
4.
Channel 4 Video or Audio Input - Output
5.
Video Input from Mule Transmitter
6.
RS485 Input
Figure 2
7.
RS485 Data Transmit L.E.D
8.
Switch, for Channel 4 Video Input or RS485
9.
Gain Control Switch
10.
Power Input 12v D.C Only
11.
Power L.E.D
Connections - RX Receiver
Each CCTV Mule is clearly marked on the power side as:
Rx
- Receiver
Tx
- Transmitter unit has the following connections;
1.
Channel 1 Video Input
2.
Channel 2 Video Input
3.
Channel 3 Video Input
4.
Channel 4 Video or Audio Input - Output
5.
Switch, for Channel 4 Video Input or RS485
6.
Video Output to Mule Receiver
Step 2
- identify the relevant connections on the Mule4.
CCTV Mule Instructions
