43
User Manual
Recording Configuration
User can set the DVR to record video with specified perimeters. The
DVR will start recording in the following cases:
①
When user presses the
button in the system front panel
for manual emergency recording
When user clicks on
button from the control panel in the
surveillance screen for manual emergency recording.
If schedule is set up to record at certain times of the day.
When motion detection mode is enabled. Recording will start
when any change is detected in channel pixel frames
When a sensor is triggered
When a ‘Video Loss’ is triggered (The other channels will start
recording)
In Recording Setup ‘Record Config’ of the main menu, a series of
configuration screens is provided. The user can use this menu to
configure the DVR to start recording in different types of situations.
