19
Initialization
Insert „Händlerkarte“ (GeldKarte optional)
Initial state
1. Turn off the terminal and remove backcover
2. Insert Händlerkarte SIM in SAM1 slot
3. Mount backcover
•
Please do not remove „Händler-
karte“ SIM before executing a successful
reconsiliation with closure. Please
check the receipt. Otherwise payments
can be lost.
Please proof your receipts for a successful
initialization, diagnosis and EMV diagnosis.
After that the terminal is ready to use.
If neccessary you can start the initialization
directly with a softkey button or via the menu.
Status bar (concact-
less reader ready,
time and communi-
cation information)
End of Day
With cash register
(„Terminal ready“)
SAM1
!
- TESTVERSION -
CCV-Deutschland
Systemtest
Initialisierung
- TESTVERSION -
CCV-Deutschland
Systemtest
EMV Konfigurationsdiagnose
- TESTVERSION -
CCV-Deutschland
Systemtest
Auto. Tagesabschluss
- TESTVERSION -
CCV-Deutschland
Systemtest
Diagnose
09.03.2017
Terminal-ID
09.03.2017
Terminal-ID
TA-Nr.
Max. Offlinezähler
09.03.2017
Terminal-ID
TA-Nr.
09.03.2017
Terminal-ID
TA-Nr.
Beleg-Nr. von:
Z-System
Kauf
Summe
MasterCard Online
MasterCard
Summe
**
Anzahl
0001
00001
0001
00001
Gebucht
Terminal Typ
Terminalfähigkeiten
Erw. Terminalfähigk.
RID
Zahlungssystem
Schlüsselindex
Schlüsselindex
Schlüsselindex
Schlüsselindex
Schlüsselindex
Schlüsselindex
RID
Zahlungssystem
Schlüsselindex
Schlüsselindex
Schlüsselindex
Schlüsselindex
Schlüsselindex
Schlüsselindex
** Erfolgreich durchgeführt **
Terminal
Summe EUR
Zahlungssysteme
** Erfolgreich durchgeführt **
09:57
09:57
60000384
095717
40
09:57
095719
09:57
095718
0073 bis 0073
Betrag
0,05
0,05
0,05
0,05
**
22
E0F8C8
7000F0F001
A000000003
Visa
98
99
95
92
94
AE
A000000004
MasterVard
FE
F3
FA
F1
EF
AE
1. Connect the terminal to the power source via
the power adapter.
2. The device starts up.
3. Start the commissioning with „YES“.
4. Select the desired terminal language.
5. Enter and repeat the 8-digit terminal ID provi-
ded by your network operator.
6. Optional: Select the desired PU. The PU corre-
sponds to a communication dial-up set called
by your network operator along with the ter-
minal ID. If only one dialing set was stored,
there is no query of the PU.
7. Select one or more communication types
(LAN, Wifi, 3G / 4G). If you are commissio-
ning several types of communication, you can
switch between them by softkey (eg Wifi - 3G).
8. If you want to operate the terminal with a cash
register, the cash register protocols ZVT and
O.P.I. via TCP / IP are always active and do not
need to be activated. Only in the case of ZVT
via a serial RS232 connection, the cash regis-
ter interface must be activated accordingly.
9. After setting the communication, the terminal
automatically connects to your payment net-
work operator and performs initialization, ad-
vanced diagnostics, and EMV diagnostics.
10. After successfully establishing the connection
and carrying out the initialization, extended
diagnostics and EMV diagnostics, the terminal
will print corresponding documents. Please
check this for a successful implementation.
Afterwards the terminal is ready for use.
Procedure
1. Connect
2. Turn on
3. Start startup
4. Select your
language
5. Enter
Teminal-ID
6. Select PU
7. Setup
Communication
8. Optional: setup
cash register
9. Host selection
10. Ready
