REVEX
2PH from 120A to 210A
User’s manual
45
Save
: save the recipe in a fi le
Save as
: save a copy of the recipe in a fi le
Download to unit
: send the current recipe parameters in the connected
power controller
: print the recipe (see sample at right)
Print report
: print the recipe (see sample at right)
To edit the actual recipe values click a parameter menu name:
SETUP
ADVANCED SETUP
HARDWARE
COMMUNICATIONS
and after click on the value and modify it.
NOTE!
Changes to the values here aff ect
the open recipe only. To apply these
changes to the power controller settings,
download them to the power controller
using the Download to unit option.
10.6.3 Test Section
This section is used to monitor and adjust the
operation of the power controller in real time
using RS485 or USB communication port.
After select the model, is possible access to
this section clicking the “TEST” tab below the
main menu.
Operating on TEST Section:
Online
button: is the button to start or stop
communication updates with the power
controller.
After communication starts, a green
communication status indicator
spins clockwise when the software
communicates correctly with a power controller, if the connection link is broken the color will become red
Address
: value used to set the power controller address
Access Level:
click the value to log in or out. Default Password address is “1111”.
To confi gure and monitor the digital inputs:
Digital input states and functions
:
show whether each input detects an open or closed
circuit and the function the input performs.
Digital Input States and Function Selectors
:
set the function for each digital input. Click DI1 or DI2 to
expand the options.
Status and Setup Indicators:
Digital input status
: light on when the input is a closed circuit
Enable indicator
: light on when the power controller is enabled
Enable/Disable button:
click on to enable the
power controller if a digital input is not confi gured
for this function
ON indicator
: light on when there is demand for
the output to be on
SC indicator
: light on when there is a shorted SCR
alarm active
HB indicator
: light on when there is a heater break
alarm active
TH indicator
: light on when the heat sink over
temperature alarm is active
I Lim indicator
: light on when the load current
exceeds the current limit setting
Unit Size
: Indicate the maximum rated current of
the power controller
Max Volt
: indicate the maximum rated voltage for the power controller
V Aux
: indicate the voltage the auxiliary input is set to use for powering the electronics
Input Type1
: indicate the signal analog input 1’s type
Input Type2
: indicate the signal analog input 2’s type
DI1
: indicate digital input 1’s function
DI2
: indicate digital input 2’s function
Firing
: indicate the fi ring type the power controller is set to use
Feedback
: indicate the feedback type the power controller is set to use
Data Log
: indicate the Data Log status.
Buttons setup options:
Firing
: view and set the fi ring type and the associated
parameters
Feedback
: view and set feedback type
Communication
: view and set communication options
for ports, protocols and fi eldbus
Summary of Contents for REVEX 2PH 120A
Page 2: ......
