CD Automation REVO SSR, User Manual

10

REVO SSR

User’s manual

Technical Specifications

2.1 General features

Cover and Socket material: 

PolymericV2

Mounting: 

To screw (on heat-sink not supplied)

Utilization Category 

AC-51  AC-55b  

IP Code 

20

Method of Connecting 

Single Phase load

Delay switch ON/OFF time: 

1/2 Period Max

2.2 Input features

Logic input SSR 

5 ÷ 30Vdc 9mA Max (ON >5Vdc OFF <4Vdc)

2.3 Output features (power device)

Nominal current in continuous service: 

See order code

Max peak current (10ms) 

360A for unit type 62

540A for unit type 74

700A for unit type 90

Nominal Voltage range 

Ue

: 24÷600V

Repetitive peak reverse voltage 

Uimp

: 

1200V (480V) 1600V (600V)

Latching current: 

250mA

Leakage current: 

15mA eff

FUSE I²T value suggested at 500Vac tp=10msec:  525 A²s  for unit type 62
 

1260 A²s  for unit type 74

1260 A²s  for unit type 90

Frequency range: 

47÷70Hz

Power loss (I=Inom): 

see the Dissipation Curves

Isolation Voltage 

Ui

: 2500Vac

2.4 Environmental installation conditions

Ambient temperature 

0-40°C (32-104°F) at nominal current. 

Over 40°C use the derating curve (max 50°C).

Storage temperature 

-25°C to 70°C, -13°F to 158°F

Installation place 

Don’t install at direct sun light,

where there are conductive dust, corrosive gas, 

vibration or water and also in salty environmental.

Altitude 

Up to 1000 meter over sea level. 

For higher altitude reduce the nominal current 

of 2% for each 100m over 1000m

Humidity 

From 5 to 95% without condense and ice

Pollution Level 

Up to 2nd Level ref.  IEC 60947-1 6.1.3.2

2