3
Tilt Floor Fan
User Manual
1.
Attach wheels (H) to the base (G).
2. Secure wheels (H) by inserting a split pin (AA) into the whole on the wheel shaft and splitting the pin.
2
Assembly Instructions
4
Care and Maintenance
3
Operating Instructions
TO ADJUST AIRFLOW UPWARD OR DOWNWARD
Tilt the fan head to the desired angle.
SPEED CONTROL
Change the setting on the speed regulator to the desired setting-low “1’’ or high “2”.
MOVING FAN
Grasp the handle firmly and move to the desired location.
It is normal for the motor to feel warm to the touch during operation. The motor is thermally
protected and will automatically shut off when it overheats. If this happens immediately
disconnect the fan from the power outlet.
Unplug the appliance before cleaning. Don’t use any water for cleaning metal surfaces. Slightly moisten a cloth
and then wipe off the surfaces of the fan. In order to remove dust from the grill, use a vacuum cleaner or remove
the front grill by removing the securing screws on the edge of the grill. After cleaning, remount the grill. After
doing this, fasten the screws on the edge of the grill.
