OPERATION GUIDE PART 4
MANAGING PRESETS
With 3C, you can store and recall Presets of Image, White Balance, Focus and Zoom settings.
The Image presets (labelled M1-M6) store ISO, Aperture, Shutter Angle, White Balance
Temperature and White Balance Tint.
The White Balance presets (labelled WB1-WB2) store
only
the White Balance Temperature and
White Balance Tint.
The Focus presets (labelled A-F) store focus points and the Zoom presets (labelled M1-M4)
store zoom points.
To write or overwrite a Preset of the currently set parameters for a function, hold down the
button for the slot in which you wish to save it and the screen will vibrate to confirm that it has
been written.
To recall a Preset, simply press the button for the required slot and the settings will be recalled
and immediately sent to the camera (see
Note
).
All Preset data is stored in non-volatile memory so they are available every time you use 3C.
Note
Please see the
Focus Controls
section of this User Guide for operational guidance for focus
transitions.
!
3C Cinema Camera Controller User Guide - © 2019 CDA-TEK Ltd
11
