GETTING STARTED
CONNECT 3C TO YOUR BLACKMAGIC DESIGN POCKET CINEMA CAMERA 4K
Before opening 3C, please ensure that you have both Bluetooth and Location enabled in the
Settings of your Android device and have selected Bluetooth to be ON in the Setup menu of
your Blackmagic Design Pocket Cinema Camera 4K.
Upon opening 3C you will then be presented with the Scan and Connect screen.
Pressing the “Scan” button will then present you with a list of Bluetooth LE devices and you
should then press to select your camera from the list and then press the “Connect” button.
3C will then connect to your camera and after a few moments the main screen will be displayed.
Note
If you are using a small screen Android device or do not wish to use the Focus and/or the Zoom
controls of 3C the simply press each box to deselect them before you connect to the camera.
If you wish to use one of the two compatible Bluetooth gamepad device types then similarly
select these before you connect to the camera. See GAMEPAD CONTROLS section of this
guide for operational instructions.
Your choices for these settings will be stored for the next time you run 3C but can be changed at
any time.
!
3C Cinema Camera Controller User Guide - © 2019 CDA-TEK Ltd
6
