19
Location
✓
The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but
not in a room or space containing a bath or a shower.
✓
The appliance must not be installed in a bed-sitting room of less than 20 m
3
.
✓
The appliance is designed and approved for domestic use only and should not be
installed in a commercial, semi commercial or communal environment.
✓
Your product will not be guaranteed if installed in any of the above environments
and could affect any third party or public liability insurances you may have.
✓
This hob should only be installed by a
qualified installer
.
Failure to observe this rule leads to cancellation of the guarantee.
✓
The appliance must be installed correctly, in compliance with the regulations in force
and following the manufacturer's instructions.
✓
Any repair or maintenance must be performed with the appliance switched off.
✓
These hobs are designed to be fitted into 600 mm deep kitchen units.
✓
These appliances have been designed and manufactured to be fitted into heat-resis-
tant units.
✓
The walls of the units must be capable of resisting temperatures of 75 °C above
room temperature.
✓
We would point out that the adhesive which bonds the plastic laminate to the furni-
ture must withstand temperatures not less than 150 °C to avoid elamination.
✓
Avoid installation near inflammable materials (e.g. curtains).
Summary of Contents for 4Q4
Page 12: ...12 Figure 9...
Page 18: ...18 Tips for installation...
Page 34: ...34...
Page 35: ...35...
