IC43
10
(fi
g.
10)
(fi g. 11)
•
Put a container below the beer tap “B” (fi g. 10) or connect an adequate tube to the beer tap in order that the cleaning product goes out directly in the
container or sink.
•
Fully open the beer tap “B” (fi g. 11)
(fi
g.
12)
(fi g. 13)
•
Open the water tap “Z” (fi g. 12).
•
Open tap “X” (fi g. 13). The water should fl ow slowly from the beer tap. If the water pressure is too high, adjust tap “X” (fi g. 13) or “Z” (fi g 12).
•
As soon as blue water starts to fl ow out of the beer tap, close the tap and leave the product to work for a minimum of 15 minutes.
•
After 15 minutes open the tap and let the water fl ow until it is clear. Keep open for a few more minutes to thoroughly rinse.
(fi
g.
14)
•
Close taps “X”, “Z” and “B” (fi g. 14).
(fi g. 15)
(fi g. 16)
•
Release and remove the dispense head from the washing attachment “V” (fi g. 15).
•
Carefully attach the dispense head to the keg attachment and secure with the lever (fi g. 16).
B
Z
X
X
Z
B
V
