17
Figure 18
Figure 19
Figure 20
Figure 21
REMOVAL OF THE INNER GLASS
DOOR PANEL
The inner glass door panel can easily be
removed for cleaning by unscrewing the two
screws (figure 18).
During re-assembly, ensure that the inner glass is
correctly aligned and do not over tighten the
screws.
REMOVING THE OVEN DOOR
Please operate as follows:
– Open the door completely.
– Push down the lever “L” and, keeping it in this
position, slowly close the door in order to
lock the hinge (Fig. 19).
– Grip the door (as indicated in fig. 20) and,
while closing it, release the two hinges as
shown in fig. 21.
REASSEMBLING THE OVEN
DOOR
– Grip the door with your hands placed near the
hinges and raise the levers “H” with your
forefingers (fig. 21).
– Insert the hinges in position until the notch on
lever “H” is firmly hooked on the bottom of the
hinge aperture.
– Open the door completely to release levers
“L”.
– If the door is out of line or does not close
properly the hinges are not sitting properly.
Start again from figure 19.
L
H
ATTENTION
The appliance gets very hot, mainly around
the cooking areas. It is very important that
children are not left alone in the kitchen
when you are cooking.
Summary of Contents for CD 900
Page 23: ...23...
Page 24: ...1101401 6 Double Oven...
