background image

17

As the colours of the wires in the mains lead of this appliance may not 
correspond with the coloured markings identifying the terminals in your 
plug, proceed as follows:-

•   

The wire which is coloured 

GREEN

 and 

YELLOW

 must be connected 

to the terminal which is marked with letter

 (E)

 or by the 

Earth

    

symbol 

 or coloured 

GREEN

 and 

YELLOW

.

•   

The wire which is coloured 

BLUE

 must be connected to the terminal 

which is marked with the letter 

(N)

, or coloured 

BLACK

.

•   

The wire which is coloured 

BROWN

 must be connected to the 

terminal which is marked with the letter 

(L)

 or coloured 

RED

If in doubt regarding the electrical connection of this appliance, consult a 
qualified electrician. Do not shorten the supply cable, the appliance may 
require removing for servicing.

N.B. Ensure that the plug socket is situated in an easily accessible place.

If the power supply cord is damaged, it must replaced by a CDA 
authorised agent.

Technical information:

For electrical ratings see plate on rear of machine.

Overall dimensions : 

86.5 - 89 cm x 59.5 cm x 53 cm (height x width x depth)

Maximum dry weights:

Cotton or linen 7.0 kg

Maximum dry weights:

Synthetics 2.0kg.

Fuse rating: 

13 A

Summary of Contents for CI921





















Reviews: