17
Assembly and electrical connection should be carried out by
competent personnel.
Do not mount the isolation switch behind the chimney section. It is
a requirement that you must be able to isolate the extractor from
the mains electrical supply after installation.
Electrical information
Mains electrical voltage:
220 – 240Vac.
Total rated power consumption: 278W
Troubleshooting
If your extractor is not working:
1.
Check that the mains supply has not been switched off.
2.
Check that the fuse in the spur has not blown.
If your lights are not working:
1.
Check that the mains supply has not been switched off.
2.
Check whether the extractor still extracts on any speed. If not,
check the fuse, as above. If the lights still do not work, contact
CDA Customer Care using the details on page 18.
(continued on page 18)
