18
If you notice speed 4 reverting to speed 3 after approximately 6
minutes:
This is not a fault. Regulations issued by the European Commission in
January 2015 dictate that internal motor extractors with a maximum air
capacity higher than 650m³/h must be equipped with a timer device
that automatically switches the speed from ‘4th’, or intensive, to 3rd
after 6 minutes of operation.
If the light button is flashing:
This is not a fault. After 30 hours of usage the light button will flash to
signal that the grease filter needs to be cleaned. Press and hold the
light button to reset after cleaning.
If any of the potential resolutions in this guide do not resolve your
issue, please contact CDA Customer Care using the contact details
below.
Contact CDA Customer Care
A: Customer Care Department, The CDA Group Ltd, Harby Road,
Langar, Nottinghamshire, NG13 9HY
T: 01949 862 012
F: 01949 862 003
E: customer.care@cda.eu
W: www.cda.eu