19
Assembly and electrical connection should be carried out by
competent personnel.
The mains lead of this appliance has been fitted with a BS 1363A 3A
fused plug. To change a fuse in this type of plug, follow the steps
below:
1. Remove the fuse cover and fuse.
2.
Fit replacement 3A fuse, ASTA approved to BS 1362 type, into the
fuse cover.
3.
Replace fuse cover.
Important: do not use the appliance without the fuse cover in
position.
How to connect an alternative plug
If the fitted plug is not suitable for your socket outlet, then it should
be cut off and disposed of safely to avoid possible shock hazard. A
suitable alternative plug of 3 Amp rating to BS 1363 should be used.
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in
your plug, proceed as follows:-
•
The wire which is coloured GREEN and YELLOW must be connected
to the terminal which is marked with letter (E) or by the Earth symbol
or coloured GREEN and YELLOW.
•
The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter (N) or coloured BLACK.