12
Timer function
The display board has a feature whereby a timer can be set in 5
minute increments up to a maximum time of 30 minutes.
•
Press the
key to activate the timer. Each press increases the
time by 5 minutes. The time will be shown on the timer display.
This time will flash.
•
When the timer ends, an alarm will sound. Press any key to stop it.
•
To cancel the timer, press the
key. The timer display will be
solidly lit for a few seconds and then should turn off.
Mute function
It is possible to mute all sounds from the display board, this is useful
on religious holidays or late at night.
•
Press the
key. The mute symbol should illuminate on the
display board.
•
To cancel, press the
key.
Door open alarm
If the door is left open for 2
minutes or more, an alarm sounds
on the appliance. Shut the door
to stop the alarm. If the alarm
does not stop, check that the
door is closing properly and
that nothing is obstructing the
small panel on the bottom of
the fridge frame (circled). The
sensor is behind this. If the alarm
continues, contact service.
Sensor