16
Fault codes
•
The ‘e’ on the display board is always on (except when screen
saver is active). THIS IS NOT A FAULT.
•
A constant beeping and no cooling performance from the
appliance suggests a faulty door sensor. Contact Service.
Installation and ventilation
When installing this product we recommend you seek the help
of another individual. This product may have some sharp edges.
Please take care and wear adequate PPE when handling.
This appliance must never be installed close to heat sources such
as heating elements, radiators, ovens and cookers nor installed in
damp places or direct sunlight.
ERROR TYPE
MEANING
REASON
REMEDY
SR
Failure warnings
Appears when one or
more of the refrigerator
parts fail or there is a
problem in the cooling
system.
Call a service agent for assistance as
soon as possible.
LC
Refrigerator
compartment
is not cold
enough
This warning especially
appears if there has
been a power failure
for a long period or
when the refrigerator is
operated for the first
time. Ideal temperature
for the refrigerator
compartment is +4°C
If you see this warning,
your foods are at risk of
spoiling.
1. Set the refrigerator temperature
to colder values or set to Super
Cool mode until the compartment
reaches normal temperature.
2. Open the door as little as possible
until the fault clears.
HC
Refrigerator
compartment
too cold
The food will start to
freeze because the
temperature is too cold.
1. Check if the Super Cool function is
switched on.
2. Decrease the refrigerator temperature
value.
LP
"Low voltage"
Warning
Refrigerators switches
to standby mode when
the voltage supply falls
below 170 Volts.
This feature prevents the compressor
from damage due to low voltage.
The refrigerator will start operating
automatically when the voltage restores
to the required level.
E
Eco mode
Eco mode is set
No fault. See page 11.
