17
650
1860
595
(700
with
handle)
Failure to provide adequate ventilation
can lead to increased running costs and
premature failure; it may also invalidate
the warranty provided with the product.
•
The plug should be fully accessible at all
times.
•
Ensure ventilation openings are kept
clear.
•
Do not use
a multi-plug adaptor in
the socket to connect this appliance
alongside other appliances.
•
Do not tilt the fridge beyond 45º.
•
Do not exert excessive pressure on the
appliance.
•
Ensure that there is a gap of no less than 10cm above and to
the sides of the appliance to allow for ventilation. The clearance
between the sides and adjacent furniture must also allow the
doors to open fully. Note that a greater side gap will be required
if the appliance is to be positioned next to a wall to allow the
doors to open fully.
•
A gap of 7cm should be allowed for
ventilation between the rear wall and
the back of the appliance. There is a
plastic guide/stopper supplied with the
appliance that should be fitted when
aligning the appliance with a wall.
Place the guide into the condenser
and turn it by 90° (Fig 6). The guide
will then lock into place.
Fig. 5
Appliance dimensions
Fig. 6
