8
Installation And Ventilation
This appliance must never be installed close to heat sources i.e.
heating elements, cookers or in damp places
The diagram shows the ventilation requirements for your product.
Failure to provide adequate ventilation can lead to increased running
costs and premature failure and may invalidate the warranty provided
with the product.
•
Ensure ventilation openings are kept clear.
•
Do not use a multi-purpose socket alongside other appliances.
•
Do not tilt the fridge beyond 45
º
•
Do not exert excessive pressure on the appliance.
•
Place the refrigerator in a well-ventilated position, away from heat
sources, damp and direct sunlight.
•
Ensure that a gap of no less than 30cm is left above the appliance
and that the gap around the outside is no less than 10cm to allow
the door to open fully.
•
If the appliance is to be installed enclosed between units, please
ensure a 50mm gap above the appliance or a 100mm gap at the
rear of the appliance to the ceiling or any furniture above.
fig. 2
1855
695
595
