background image

3

(EMC) 2004/108/EC.  Parts intended to come into contact with food 
conform to 89/109/EC.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE 
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must be taken to a special 
local authority waste collection centre or to a dealer providing 
appliance recycling services.

Disposing of a household appliance separately avoids possible 
negative consequences for the environment and health.  It also 
enables the constituent materials to be recovered, saving both energy 
and resources.  As a reminder of the need to dispose of household 
appliances separately, the product is marked with a crossed-out 
wheeled dustbin. 

Please note:

   Induction hobs become hot and remain hot during and immediately 

after use. Do not touch the hob until it has been allowed to cool.

  Keep children away from the appliance when in use.

  Never use the hob top for storage.

   Pan handles should never stand out beyond the edge of the 

worktop. This will help to avoid children reaching them.

  Do not lean over the hob when it is in use.

  Follow the cleaning instructions carefully.

   Ensure the base of the saucepan is clean and dry before placing it 

on the hob.

   Avoid hard shocks from cookware – the vitroceramic glass surface 

is highly resistant but not unbreakable.

Summary of Contents for HN6111FR





























Reviews: