17
•
Locate the appliance in a well ventilated position, away from heat
sources, damp and direct sunlight.
•
Ensure that there is a gap of no less than 10cm above and to the
sides of the appliance to allow for ventilation. The clearance
between the sides and adjacent furniture must also allow the doors
to open fully.
Note that a greater side gap will be required if the
appliance is to be positioned next to a wall to allow the doors to
open fully.
•
A gap of 5cm must be allowed for ventilation between the rear wall
and the back of the appliance.
Electrical Information
Warning! This appliance must be earthed.
The mains lead of this appliance has been fitted with a BS 1363A 13A
fused plug. To change a fuse in this type of plug, follow the steps
below:
1.
Remove the fuse cover and fuse.
2.
Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the
fuse cover.
3.
Replace fuse cover.
Fig. 4