20
Installation and
Ventilation
This appliance must never be
installed close to heat sources
i.e. heating elements and cookers or
in damp places.
Failure to provide adequate ventilation
can lead to increased running costs
and premature failure; it may also
invalidate the warranty provided with
the product.
•
The plug should be fully accessible at all times.
•
Ensure ventilation openings are kept clear.
•
Do not use a multi-plug adaptor in the socket to connect this
appliance alongside other appliances.
•
Do not tilt the fridge beyond 45º.
•
Do not exert excessive pressure on the appliance.
•
Locate the appliance in a well ventilated position, away from heat
sources, damp and direct sunlight.
•
Ensure that there is a gap of no less than 10cm above and to the
sides of the appliance to allow for ventilation. The clearance
between the sides and adjacent furniture will also allow the doors
to open fully. Note that a greater side gap will be required if the
appliance is to be positioned next to a wall to allow the doors to
open fully.
•
A gap of 5cm must be allowed for ventilation between the rear wall
and the back of the appliance.
Fig. 4
690
1800
908
