4
Introduction
Congratulations on your purchase of this
CDA
cooker
which has been carefully
designed and produced to give you many years of satisfactory use.
Before using this appliance it is essential that the following instructions are carefully
read and fully understood.
We would emphasise that the installation section must be fully complied with for your
safety to ensure that you obtain the maximum benefits from your appliance.
Declaration of
CE
conformity
✓
This cooker has been designed, constructed and marketed in compliance with:
- Safety requirements of EU Directive "Low Voltage" 2006/95/EC;
- Protection requirements of EU Directive "EMC" 89/336/EEC;
- Requirements of EU Directive 93/68/EEC.
Assembling the
backguard
Before installing the cooker,
assemble the backguard “V”
(fig. 1).
Please note that :
■
The backguard “V” can
be found packed at the
rear of the cooker.
■
Before assembling
remove any protective
film/adhesive tape.
■
The backguard must be
fixed to the cooktop using
the three supports “B”
supplied with the appli-
ance (see fig. 1).
V
A
B
Fig. 1