32
Over Doors - Cleaning The Panes Of Glass
The oven doors have two panes. To clean these, you need to
remove the inner pane.
Removing the Inner Pane
– Open the door to the full extent (Fig. 24a).
– Open the lever “
A
” completely on the left and right hinges
(Fig. 24b).
– Hold the door as shown in Fig. 24d.
– Gently close the door (fig. 24c) until left and right hinge levers
“
A
” are hooked to part “
B
” of the door (fig. 24b).
– Gently pull out the inner pane of glass (Fig. 25a).
– Clean the glass with an appropriate cleaner.
– Dry thoroughly, and place the pane on a soft surface.
– Now you can also clean the inside of the outer glass.
Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the panes of glass since they can scratch the
surface, which may result in shattering of the glass.
Reassembling the Inner Pane
– Check the correct positioning of the no.4 (four) silicone
rubbers “
D
” (fig. 25b).
– Check that you are holding the pane the correct way. You
should be able to read the wording on it as it faces you.
– Insert the inner pane in the left “
E
” and right
“
F
” side guides
(fig. 25c) and gently let it slide up to the retainers “
H
” (fig. 25d).
– Unlock the oven door by opening it completely and closing
the lever “
A
” on the left and right hinges (fig. 24a).
Fig. 25c
Fig. 25b
Fig. 25d
H
D
Fig. 25a
The gap between the top edge of the
inner glass and the top of the door is
normal. This allows the cooling air to
circulate.
E
F
Summary of Contents for RV 1061
Page 2: ...2 ...