CDH NF P 93-352, Manual

16

EN

Content

About this manual........................................................................................16

Compliance with intended use....................................................................16

General safety instructions...........................................................................16

Markings on the product..............................................................................16

Delivered equipment and assembly.............................................................16

Assembly and use.........................................................................................16

Care and maintenance..................................................................................16

Professional  use...........................................................................................17

Recurring controls........................................................................................17

Transport and storage...................................................................................17

Packaging and disposal.............................. ..................................................17

1 About this manual

This manual describes how to use your work platform safely 

- Read this manual carefully before use and keep it for future reference.

This manual must be given to the new owner if the work platform is resold.

2 Compliance with intended use

This work platform is a piece of equipment used for working at a height, 

which can be used indoors or outdoors.

This work platform may only be used in accordance with this manual. Any 

other use is considered non-conform.

The products are guaranteed for the duration appearing in the catalogs and 

at the rates in force on the day of the order, as from the delivery, against all 

manufacturing defects, with the exception of:

- Labour and travel expenses,

- Wear parts,

- Wear and tear caused by lack of lubrication or maintenance or by impact,

-  Use  of  the  products  under  conditions  that  do  not  comply  with  those 

defined in the Seller’s instructions for use.

This  contractual  guarantee  is  limited  to  the  simple  exchange  of  the 

products considered to be defective, without giving the right to unspecified 

compensation or damages for any reason. 

3. General safety instructions

Follow the general instructions and markings on the product in addition to 

the general safety instructions, (see «Product markings» on page 16).

1. The work platform should only be assembled and operated by individuals 

who are familiar with the instructions of this manual.

2. The work platform and its components must not be modified under any 

circumstances.

3. Before use, make sure that all the components of the work platform are 

properly assembled and in good working order.

4. The use of the work platform, like all work equipment at a height, comes 

with a risk of falling and tipping over, and with a risk of injury and property 

damage. 

5. The work platform must be suitable for the intended use and installed 

only in accordance with the prescribed instructions.

6. Always place the work platform on a flat, horizontal, stable and sufficiently 

solid surface. 

7. Do not move the work platform while in use.

8.  When  positioning  the  work  platform,  make  sure  that  there  is  no  risk 

of  collision,  for  example  with  pedestrians,  vehicles  or  doors.  Lock  doors 

(except emergency exits) and windows in the work area, if necessary.

9. The ladder must be standing on its feet and not on its rungs or steps

10.  All  work  performed  with  and  on  the  work  platform  must  be  done 

carefully to minimise the risk of falling and tipping. 

11.  Do  not  use  the  ladder  outdoors  during  adverse  weather  conditions, 

such as high winds. 

12. Tiredness is a hazard and can affect safety on the work platform. Do not 

stay on the work platform for too long without taking regular breaks.

13. Use only the support surfaces provided.

14. Do not use the work platform if it is unclean (e.g. fresh paint, dirt, oil 

or snow).

15. Never move the platform by carrying the top.

16. Use non-conductive platforms for work that has to be performed under 

electrically live equipment. This platform is not suitable.

Professional use

17. For professional use, carry out a risk assessment in accordance with the 

guidelines in force in the country in which it is being used.

18.  It  is  essential  to  follow  the  legal  provisions  and  national  regulations 

applicable for professional use.

4 Markings on the product

Do not remove or obscure the safety markings on the ladder with stickers 

or inscriptions.

General markings

A.

 Read the entire manual. Additional product information can be found on 

the Internet.

B.

 Warning: Danger of falling. Falling off the platform can result in serious 

injury.

C.

 Do not use a damaged platform. Inspect the platform for damage upon 

delivery and before each use.

D.

 Do not exceed the maximum load under any circumstances.

E.

 Do not place the platform on uneven, irregular or unstable ground.

F.

 Do not lean to one side.

G.

 Only one person can climb on the platform.

H.

 Do not use the platform as a walkway.

I.

 Do not place the platform on unclean ground.

J.

 The platform can be used for private or professional purposes.

K.

  Ensure  a  safe  position  and  posture  when  performing  work  as  well  as 

when ascending and descending.

L.

 Do not perform  work that causes lateral pressure to the ladder such as, 

for example, lateral drilling of hard materials.

M.

 Do not carry heavy or unwieldy equipment while operating the platform.

N.

 Do not wear inappropriate footwear when using the platform.  

O.

Do  not  use  the  platform  if  you  have  a  physical  disability.  Take  your 

health and physical condition into account. Medication, alcohol and drug 

consumption are risks.

P.

  Identify  any  potential  hazards  that  may  be  associated  with  electrical 

equipment such as high voltage overhead lines or other exposed electrical 

equipment. Do not use the ladder around electrical hazards.

Product specific markings

Q.

 Do not use the ladder when folded

R.

 Open the platform completely before use  (both planes spread out to the 

maximum point).

S.

 Do not climb on the marked area (tool shelf)

T. 

Any pressure on the ladder must be exerced in the middle.

U.

 Avoid any lateral pressure on the ladder.

V.

 Do not climb up or down in any other way than facing the platform.

W.

 Do not use the platform to access any other surface.

X.

  Do  not  use  the  ladder  outdoors  in  adverse  weather  conditions  (e.g. 

strong winds).

Y.

For models equipped with side stabilisers, use the product only when 

they are in use (in contact with the ground).

Z.

 Lock the entire product before use. 

5 Delivered equipment and assembly

Delivered equipment:

6 Assembly and use

Perform an inspection before the first use and document this inspection. 

the results on the control plate (see «Recurring controls» page 17).

Assembling the ladder: 

Folding the ladder: 

7 Care and maintenance

To use the platform safely, we recommend using original spare parts only. 

Contact your distributor or the manufacturer. The use of spare parts from 

other manufacturers that do not meet the original specifications will void 

the warranty.

The maintenance and upkeep of the platforms are intended to ensure their 

proper functioning. Inspect the platforms regularly to ensure that they are 

not damaged. The proper functioning of the moving components must be 

ensured.

Assembly :