6
of
9
Example in a Toyota Land Cruiser and BMW series 5
4.2 Testing the alarm function
(1) Start-up test: Connect the device. After a few seconds you will hear "Ready" and the green
and red LEDs will remain on. This means that the device has been successfully activated
(2) Closing eyes test: Close your eyes for about 1-2 seconds, and you'll hear a beep sound.
This sound indicates that the alarm is operating correctly.
(3) Yawning test: Open your mouth as if you were yawning for about 1-2 seconds. You'll hear a
beep sound. This indicates that the alarm works correctly.
(4) Nodding off test: Nod off slightly for about 1-2 seconds. You'll hear a beep sound, indicating
that the alarm works correctly.
(5) V sign test: Face the camera and make a V sign for more than 3 seconds (V-shaped hand
gesture as shown in photo 4-3). Place your hand next to your head at eye level. (This gesture
might not be recognized at night or in very strong sunlight.) You will hear a beep sound and
the red light will turn off while deactivating the alarms.
(1)
Image
4-3
(2)
Image
4-4
(6) Open palm test: Raise your open palm (as shown in photo 4-4) for about 3.5 seconds. Place
your hand next to your head at eye level. (This gesture might not be recognized at night or in
very strong sunlight.) If you hear a short "Ready", it means that the device has recognized
the palm gesture as normal and it has been activated.
* You can watch an explanatory video of these tests on our website
www.cdpsa.eu
C.D.Products S.A.
