7
7.
Up Button (5)
Function 1: Press the up button to select the desired function for each menu.
Function 2: Increase the volume by pressing and holding the fast forward button
8.
Lock Menu (7)
Function 1: Lock Button.
Briefly press the lock button while watching a video fragment, to lock or unlock the file.
Function 2: Change the mode, when the camera is not recording, press this button to change between
video, photo or view.
Motion detection in continuous video monitoring
In the Video mode of the menu, open the motion detection function. If the images detected change, it will
automatically record a 10-second video. To use this function, do not turn off the device. The LCD can be
programmed to shut down, but the device must be on. The unit’s battery is not designed for long
recording periods, but rather for the Parking mode or to correctly close videos in case of an accidental
disconnection.
If you want to use the camera continuously when the vehicle’s engine is off, you should install it directly
to a battery positive through a 12 volt to 5 volt power source.
Micro TF memory card
I.
Requirements of TF card: It requires a TF CLASS6 type card.
II.
Installing the TF card
III.
Correctly insert the TF card into the TF card slot.
IV.
To remove the TF card, carefully press the TF card downward. Stop pressing and the TF card
will make a reverse motion. You can then remove it.
V.
Notes:
VI.
To prevent damages, do not turn on the device when you are introducing the TF card.
VII.
Please pay attention to the direction in which the TF card is introduced, if it is entered
incorrectly you could damage the unit and the TF card.
VIII.
When you start the unit with the TF card inside, the TF card will be the default storage. The
unit might not be able to read the information on the TF card.
IX.
If the card is not read correctly by the device, please try inserting it again or change the TF
card and try again.
X.
Cards of up to 32 GB are supported.
Viewing videos with your PC
You can directly connect the device with a computer via a USB cable, or remove the TF card and use it
directly with a TF card reader. When you plug in the cable to the PC, you will see an option that says
C.D. Products S.A.
