GALEO
Illuminated RF Keypad
INSTALLATION MANUEL
77
112
27
1] GENERAL INFORMATION
GALEOR
Illuminated RF Keypad
INSTALLATION MANUAL
HIGH RESISTANCE
TO VANDALISM
3] MOUNTING KIT
2] NOTES & RECOMMENDATIONS
Mounting recommendations
Mount the keypad on a flat surface to avoid
any vandalism and to insure the best mounting.
Security advice
For security advice reasons, change
the factory default master code.
When selecting a master code and user code avoid
sequencial codes (example:
3 4 5 6 7
).
Thank you for buying our products and for the confidence you placed
in our company.
IP64
-25°C a +70°C
Certification CE
Environmental test:
Salt spray
WEEE
Environmental tests:
vibrations
Certification FCC CFR 47
part 15 compliance
Wireless RF keypad.
Polished heavy duty Zamak
®
cast alloy.
Backlit keys.
Frequency:
433,92 Mhz.
2 channels (buttons «A» and «B»).
Compatible with Erone
®
receivers.
Compact.
Surface mount
.
Mounting with Torx
®
screws
Partially sealed with epoxy.
22 User codes - 4 or 5 digits.
1 Master code - 5 digits.
Audible and visual feedback.
Modulation: AM/ASK.
Encoding: Keeloq
®
hopping code
Dimensions (L x W x D):
GALEOR = 110 x 75 x 15mm,
Supply: Lithium battery 3,6V - LS14500.
Current consumption:
- 28 mA in transmission,
- 0,8uA in sleep-mode.
(M4x10)
Torx
®
screw)
T20 Torx
®
Spanner
Cache vis
plastique
(M4x30)
mounting
screws
Plastic
anchors
Battery
Foam
GALEOR
1
1
1
2
2
1
1
* Supplied.
EN
8
cdvigroup.com
FCC ID: PWN1002000029
“The device complies with part 15 of the FCC Rules.
Operation is subjected to the following 2 conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received,
including interference that may cause undesired operation”
