Copyright All Rights Reserved ROFU Security International Corp. ROFU BKC-5000B. Published: February 12, 2020
ROFU B5000 APP
5
Administrator Settings Page Introductions
You can Add / Delete /
Edit user information.
Audit Trail is tracking last 1000
event logs, including Tamper
Alarm. Audit Trail can be
exported in an excel file.
Tap to export all events to
excel file.
Tap to refresh all events.
Backup Data is to backup all data
to Administrator’s phone and can
be restored except Device Name,
Audit Trail logs and Device Times.
You can restore the last backup
data to a new Access Control
Keypad / Reader.
User
Audit Trail
Backup Data
Restore Backup
Device Name
Admin Passcode
Door Sensor
Lock Action
Device name can be edit as a
model number, Office, Front
door, Gate, etc.
12345 is Admin default
passcode. It’s important to
change your Admin passcode
Immediately.
You can enable Door Sensor
when you connect to a closed-
circuit magnetic sensor or a
monitored door lock that has
door sensor (or lock sensor)
outputs to monitor the open or
closed state of a door.
3 options. You can choose
Door Re-lock Time, Door
Always Unlocked and Door
Always Locked.
Make sure to set up Device Time
precisely as your current time
zone of where you are. It helps
having correct and precise data
and information.
See firmware version of Bluetooth
access and control keypad/reader.
Tamper Alarm
Door Re-lock Time
Device Time /
Firmware Version
About Us
You can activate Tamper Alarm, if
the device is vandalized, the
tamper alarm will howl
immediately and won’t go off until
it’s switched off by Administrator.
Tamper Alarm is deactivated by
default.
Tap “About Us” to show Device
Model, APP version, website
and E-mail information.
You can set the door re-lock
time interval between 1 to 1800
seconds.
