cdvigroup.com
16
INSTALLATION MANUAL
EN
STAR1M - Mullion Mifare
®
card reader
Add user cards (max. 300) :
Enter in programming mode
Yellow LED
Present the user card one after the other
Beep + green LED then yellow LED
If the card is already programmed
Beep + LED OFF then back to yellow LED
Blue LED
Present the master badge
Swipe the master badge or
wait 10 seconds
Exit from programming
mode
Enter in programming
mode
Yellow LED
Present the user card
Beep + LED OFF then back to yellow LED
Present again the same card
Beep + red LED then back to yellow LED.
If the card is not programmed it will then
Blue LED
Delete user cards :
Present the master badge
Swipe the master card or
wait 10 seconds
Exit from programming
mode
7.2 Standard mode
In Standard Mode only one user badge is programmed for each user. To delete a user
from the STAR1M, enter the programming mode and present the user badge.
1
ON
2
ON
3
ON
4
ON
ON
OFF
Dipswitch setting