CE-2500-HVE Band Sealer
Page 9
VI.
Operational Use
6.1.
Control Panel (See Diagram 6.1)
Diagram 6.1
6.2.
Prepare the machine for use
6.2.1.
This machine is equipped with a three-prong grounded socket. Be sure that the socket
is well connected for safe operation.
6.2.2.
First-time use or too long intermission will make the heating elements damp. It is
necessary to preheat at lower temperature for several minutes before the normal
operation.
6.2.3.
Adjust the height and position of the conveyor table to get the required sealing position
for your application.
6.2.4.
Adjust the position of feed opening according to the external size from sealing line to
bag opening.
6.2.5.
According to the thickness and material that to be sealed, adjust the clearance between
two heating blocks and two cooling blocks, so that both clearances are approximately
equal to the thickness of packing bag in one layer. This will guarantee sealing firmness
and high definition of embossing, and ensure a suitable length extended from the two
ends of seal.
Summary of Contents for CE-2500-HVE
