26 SHOWER SOFTENER-CEASA
e.
Take out the resin tank and valve assembly. Handle with care to avoid
damaging the circuit.
f.
Screw out the resin tank cover with special tools.
g.
Take out the strainer carefully to prevent the riser pipe from dropping out.
h.
Press the riser pipe to prevent it from dropping out. Pour out the resin, and
add 2.5L of new resin to the resin tank.
i.
Install the shower softener according to the above steps, noting the
following during the installation process:
1. The tread on the resin tank and the O-ring should be clean
2. If the riser pipe drops out, it needs to be cleaned before placing it inside the resin
tank.
3. Please make sure the drain line flow control is intact when installing the drain pipe.
d.
Take out back cover screw
Take out 6 screws with a screwdriver
c.
Remove drain pipe
Drain line flow control
Front cover
b.
Remove front cover
a.
Remove resin tank screw
4 screws
Summary of Contents for SET&SOFT
Page 1: ...SHOWER SOFTENER CEASA 1 ...