TOTALPURE 2500 / 5000 / 7500 CONNECTED
31
ENGLISH
Fig. 5
For disassembling the air inlet panel, press the tabs at both sides of the air inlet panel and pull
it up gently.
For assembling the air inlet panel back, repeat the process viceversa.
Fig. 6
Make sure the gap between the air inlet and the wall is at least 50 cm, and 10 cm to the air
outlet.
Keep the device 1 meter from any television, radio, etcetera. Otherwise it may cause strong
magnetic fields.
Having the device placed in the same spot for a long time may dirty the walls.
To ensure that the device has an adequate ventilation and efficiency, do not cover the air outlet
nor inlet.
Fig. 7
Installation of the filter
1. Remove all the packages and place the device on a dry and stable surface.
Fig. 8
2. For disassembling the filter, press the tabs at both sides of the air inlet panel and pull it
up gently.
Fig. 9
3. Take out the filters from this purifier.
Fig. 10
4. Remove all packages.
Fig. 11
5. Install the filters back to its place in order.
Fig. 12
6. Install the pre-filter back as seen in the image.
Fig. 13
7. Install the air inlet panel back to its place. Fix the filter into the tabs and gently push it. Be
careful when installing the front panel.
Fig. 14
Make sure the device is switched off before installation, maintenance and transportation.
Do not operate the air purifier without its filters installed
Remove the plastic package of each filter before operation.
Filters and functions
Fig. 15
Pre-filter
05620_05621_05622_TotalPure 2500_5000_7500_ Connected_Manual_YV_01200320.indd 31
05620_05621_05622_TotalPure 2500_5000_7500_ Connected_Manual_YV_01200320.indd 31
20/3/20 15:18
20/3/20 15:18